Nederlands: Standbeeld van Admiral Sir Bertram Home Ramsay (1883 - 1945) in Dover Castle door Stephen Melton. Het werd in 2000 onthuld door Prins Philip.
English: Statue of Admiral Sir Bertram Home Ramsay (1883 - 1945) in the grounds of Dover Castle near the edge of the White Cliffs of Dover, overlooking the harbour and English Channel beyond.
The sculpture of Admiral Ramsay holding a lowered telescope was created by Stephen Melton of Ramsgate and unveiled by Prince Philip, Duke of Edinburgh in November, 2000.
The front panel on the plinth reads:
" In memory of Admiral Sir Bertram Ramsay KCB. KBE. MBO. 1883-1945, Vice Admiral Dover, 1939-42, C-in-C Allied Naval Expeditionary Force June 1944 and of those who died in the Dunkirk and Normandy operations."
The rear panel:
" I ploughed a passage through the foam, Dunkirk and Deal - Dieppe and Dover. I brought the flower of Britain home, And took the fruit of freedom over. (A. P. Herbert)"
The two side panels are bronze reliefs of battle scenes.
If you use this work outside of the Wikimedia projects, a message or a copy is very much appreciated.
This image is not in the public domain. A statement such as "From Wikimedia Commons" or similar is not by itself sufficient. If you do not provide clear attribution to the author you didn't comply with the terms of the file's license and may not use this file. If you are unable or unwilling to provide attribution you should contact Ad Meskens to negotiate a different license.
This file has been released under a license which is incompatible with Facebook's licensing terms. It is not permitted to upload this file to Facebook.
compartir – copiar, distribuir i comunicar públicament l'obra
adaptar – fer-ne obres derivades
Amb les condicions següents:
reconeixement – Heu de donar la informació adequada sobre l'autor, proporcionar un enllaç a la llicència i indicar si s'han realitzat canvis. Podeu fer-ho amb qualsevol mitjà raonable, però de cap manera no suggereixi que l'autor us dóna suport o aprova l'ús que en feu.
compartir igual – Si modifiqueu, transformeu, o generareu amb el material, haureu de distribuir les vostres contribucions sota una llicència similar o una de compatible com l'original
Aquest fitxer conté informació addicional, probablement afegida per la càmera digital o l'escàner utilitzat per a crear-lo o digitalitzar-lo. Si s'ha modificat posteriorment, alguns detalls poden no reflectir les dades reals del fitxer modificat.
Fabricant de la càmera
FUJIFILM
Model de càmera
X-S1
Temps d'exposició
1/500 s (0,002)
Obertura del diafragma
f/5
Sensibilitat ISO
100
Dia i hora de generació de les dades
11:06, 5 ago 2015
Longitud focal de la lent
18,3 mm
Orientació
Normal
Resolució horitzontal
72 ppp
Resolució vertical
72 ppp
Programari utilitzat
GIMP 2.8.10
Data i hora de modificació del fitxer
16:21, 6 ago 2015
Posició YCbCr
co-localitzats
Programa d'exposició
Mode paisatge (per fotos de paisatges amb el fons enfocat)