This image shows two types of planes (woodworking tools)
and labels some of the parts.
A: The mouth is an opening in the bottom of the plane down through which the blade extends, and up through which wood shavings pass.
B: The iron is a plate of steel with a sharpened edge which cuts the wood. Some people refer to it as the blade.
C: The lever cap holds the blade down firmly to the body of the plane.
D: The depth adjustment knob controls how far the blade extends through the mouth.
E: The knob is a handle on the front of the plane.
F: The chipbreaker or Cap iron serves to make the blade more rigid and to curl and break apart wood shavings as they pass through the mouth.
G: The lateral adjustment lever is used to adjust the iron by skewing it so that the depth of cut is uniform across the mouth.
H: The tote is a handle on the rear of the plane.(Some aficionados object to the use of the word tote preferring handle).
I: The finger rest knob Block planes are held in the palm of the hand while the tip of the user's index finger rests in the indentation on top of the knob. On some planes the knob is used to adjust the size of the mouth by allowing a sliding portion of the sole to be moved back or forward to accomplish this.
J: The frog is a sliding iron wedge that holds the plane iron at the proper angle. It slides to adjust the gap between the cutting edge and the front of the mouth. The frog is screwed down to the inside of the sole through two parallel slots and on many planes is only adjustable with a screwdriver when the plane iron is removed. Some planes, such as the Stanley Bedrock line and the bench planes made by Lie-Nielsen and WoodRiver/WoodCraft have a screw mechanism that allows the frog to be adjusted without removing the blade.
There is also an unlabeled image for translation purposes.
compartir – copiar, distribuir i comunicar públicament l'obra
adaptar – fer-ne obres derivades
Amb les condicions següents:
reconeixement – Heu de donar la informació adequada sobre l'autor, proporcionar un enllaç a la llicència i indicar si s'han realitzat canvis. Podeu fer-ho amb qualsevol mitjà raonable, però de cap manera no suggereixi que l'autor us dóna suport o aprova l'ús que en feu.
compartir igual – Si modifiqueu, transformeu, o generareu amb el material, haureu de distribuir les vostres contribucions sota una llicència similar o una de compatible com l'original
Aquest avís de llicència s'ha afegit a aquest fitxer d'acord amb l'actualització de la llicència GFDL.http://creativecommons.org/licenses/by-sa/3.0/CC BY-SA 3.0Creative Commons Attribution-Share Alike 3.0truetrue
S'autoritza la còpia, la distribució i la modificació d'aquest document sota els termes de la llicència de documentació lliure GNU versió 1.2 o qualsevol altra versió posterior que publiqui la Free Software Foundation; sense seccions invariants, ni textos de portada, ni textos de contraportada. S'inclou una còpia d'aquesta llicència en la secció titulada GNU Free Documentation License. Subjecte a l'avís legal.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue
Llegendes
Afegeix una explicació d'una línia del que representa aquest fitxer
Parts of a Plane This image shows two types of planes (woodworking tools) and labels some of the parts. There is also an unlabeled image for translation purposes. The image was created by User:etune. on http://en.wikipedia.org/wiki/Image:Plane_pa
Aquest fitxer conté informació addicional, probablement afegida per la càmera digital o l'escàner utilitzat per a crear-lo o digitalitzar-lo. Si s'ha modificat posteriorment, alguns detalls poden no reflectir les dades reals del fitxer modificat.